Product categories
Show all

MX 50

Outline and Features
The moisture analyzer is built using a super hybrid sensor (S.H.S.) adopted in an analytical balance. Therefore, the result is more precise and gets greater repeatability.
An analyzer using the S.H.S. has high sensitivity, needs only a sample quantity of a few grams, and the analysis time becomes shorter.
A 400W halogen lamp is used as the heating source and the temperature on the sample pan can reach 200ºC within two minutes.
The software “WinCT-Moisture” can make a graph of the change of moisture content in realtime
The software “WinCT-Moisture” has an optimum temperature search program that judges heating at an appropriate temperature setting.
The analyzer is equipped with a serial interface as standard. It can be connected to a printer or computer.
The analyzer can calibrate the weighing sensor (Use special mass.) and drying temperature (Use temperature calibrator).
The analyzer can output the data required at GLP, GMP and ISO at the end of the calibration.
The analyzer has a self check function that can detect function errors
The analyzer displays the current change of moisture content per one minute [%/ min] in real-time. It can be used for the reference to find the analyzing mode.
The sample pans included in the standard accessory can be used repeatedly.
There is a test sample that is used to check the moisture accuracy. (The test sample is a part of standard accessory except ML-50)
The glass fiber sheets can be used to quick and precision measurement for liquid sample. (The glass fiber sheets are a part of standard accessory except ML-50)
A reference card is built into the bottom of the analyzer.



Models Number MX 50
Measurement Method 400W straight halogen lamp heating system with SRA filter and SHS weighing technology
Max Sample Weight Capacity 51g
Weight Resolution 0.001g
Moisture Content Display 0.01% / 0.1%
Moisture Content Accuracy

(Standard Deviation)

over 1g – 0.10%

over 5g – 0.02%

Heating Technology logen lamp (Straight type, 400 Watt max, 5000 hours)
Drying Temperature (1°C increment) 50-200ºC
Memory of Measurement Programs 20 setS
Measurement Programs Standard Mode/Automatic Mode/Quick Mode/Timer Mode/Manual Mode
Measurement Mode Moisture content(Wet or Dry base) /Dry content/Ratio/Weight
Heating Mode Standard / Quick / Step / Ramp
Display Type Large VFD
Interface RS-232C standard
Data Memory Function 100 Results
Operating Temperature 5-40ºC (41-104ºF) less than 85%RH
GLP/GMP/ISO Available
Self Check Function Standard
Communication Software WinCT-Moisture standard
Sample Pan Size Ø85mm
Power AC 100V to 120V (3A) or AC 200V to 240V (1.5A), 50/60 Hz, Approx. 400W
Physical  Dimention/Weight 215(W) x 320(D) x 173(H) / Approx. 6kg

Standard accessories

Sample Pans ( 20 for MS/MX/MF 10 for ML )

Pan Handles ( 2 for MS/MX/MF, 1 for ML )

Tweezers ( for MS/MX/MF )

Spoon ( for MS/MX/MF )

Test Sample ( 30g of Sodium Tartrate Dihydrate for MS/MX/MF )

CD-ROM ( WinCT-Moisture for MS/MX

WinCT for MF )

Glass Fiber Sheet ( for MS/MX/MF )

RS-232C Cable ( for MS/MX )

Display Cover

Dust Cover ( for MS/MX/MF )

Instruction Manual

Quick Reference Card

Power Cable


Watch Video